Makita 9564cv: Everything You Need To Know – Specifications, Comparisons, Manuals, And Troubleshooting

Makita 9564CV Information

The Makita 9564CV is a 4-1/2-inch angle grinder that is powered by a 13-amp motor. It has a variable speed dial that allows you to adjust the RPM from 2,800 to 10,500, making it ideal for a variety of applications. The 9564CV also features a SJS™ mechanical clutch system that helps to protect the gears from damage if the wheel is suddenly stopped.

Image of Makita 9564CV angle grinder

Here is a table of the full specifications of the Makita 9564CV:

SpecificationValue
Motor13-amp
No-load speed2,800-10,500 RPM
Variable speed dial5-stage
SJS™ mechanical clutch systemYes
Soft startYes
Electronic limiterYes
Electronic speed controlYes
Dust protectionYes
Weight5.3 lbs.
Overall length11-3/4"

Features

  • Powerful 13-amp motor
  • Variable speed dial for precise control
  • SJS™ mechanical clutch system for gear protection
  • Soft start for smooth startups
  • Electronic limiter and speed control for consistent performance
  • Dust protection for longer tool life
  • Ergonomic design for comfortable use

What's in the box

  • Makita 9564CV angle grinder
  • 4.5-inch grinding wheel
  • 3-inch sanding disc
  • Side handle
  • Wrench
  • Owner's manual

The Makita 9564CV is a versatile and powerful angle grinder that is ideal for a variety of applications. It is well-made and features a number of safety features that help to protect the user. If you are looking for an angle grinder that is powerful, versatile, and easy to use, the Makita 9564CV is a great option.

Here are some additional features of the Makita 9564CV:

  • The side handle can be easily installed on either side of the tool, making it comfortable to use for both right-handed and left-handed users.
  • The "tool-less" wheel guard adjustment provides easy clamping and removal of the wheel guard.
  • The dust protection system helps to keep the motor and bearings clean, which helps to extend the life of the tool.
  • The overall design of the 9564CV is compact and lightweight, making it easy to transport and maneuver.

Overall, the Makita 9564CV is a great choice for anyone who needs a powerful and versatile angle grinder. It is well-made, easy to use, and features a number of safety features that help to protect the user.

Makita 9564CV Compare with Similar Item

a table comparing the Makita 9564CV to two similar items:

FeatureMakita 9564CVMilwaukee 2780-20DeWalt D28401
Power7.5 amps8 amps7.5 amps
Speed11,000 RPM11,000 RPM10,000 RPM
Weight5.6 pounds6.2 pounds6.1 pounds
FeaturesSJS™ clutch, dust blower, side handleQuick-lock spindle, dust blower, side handleSpindle lock, dust blower, side handle
Price$120$130$120

Comparison

The Makita 9564CV and Milwaukee 2780-20 are very similar in terms of power, speed, and weight. The Makita has a SJS™ clutch, which helps to prevent the disc from breaking if it binds up. The Milwaukee has a Quick-lock spindle, which makes it easier to change discs. The DeWalt D28401 is a bit less powerful than the other two models, but it is also a bit lighter.

Winner

The Makita 9564CV is a great all-around angle grinder. It is powerful, versatile, and easy to use. If you are looking for a reliable and durable angle grinder, the Makita is a great option.

Other considerations

If you are looking for a more powerful angle grinder, the Milwaukee 2780-20 is a good choice. It also has a few features that the Makita does not, such as the Quick-lock spindle. If you are looking for a lighter angle grinder, the DeWalt D28401 is a good option. It is also less expensive than the other two models.

Makita 9564CV Pros/Cons and My Thought

a comprehensive review of the Makita 9564CV angle grinder, including pros, cons, user reviews, and my thoughts:

Pros:

  • Powerful 11A motor delivers up to 8,500 RPM for fast cutting and grinding
  • Lightweight and compact design for easy handling
  • Ergonomic rubber grip provides a comfortable and secure hold
  • Dust-sealed switch and bearings for long life
  • Includes a variety of accessories, such as a guard, wrench, and case

Cons:

  • Noisy
  • Can be a bit vibration-y
  • Not as durable as some other models

User reviews:

  • Positive: "This is a great angle grinder! It's powerful, lightweight, and easy to use. I've used it for a variety of projects, and it's always done a great job."
  • Negative: "I'm not a fan of how noisy this grinder is. It's also a bit vibration-y, which can be annoying after a while."

My thoughts:

The Makita 9564CV is a great angle grinder for the money. It's powerful, lightweight, and easy to use. However, it is a bit noisy and vibration-y. If you're looking for a top-of-the-line grinder, there are better options out there. But if you're looking for a reliable and affordable grinder, the Makita 9564CV is a great choice.

Overall, the Makita 9564CV is a good angle grinder with a few flaws. It's powerful and lightweight, but it's also noisy and vibration-y. If you can overlook those flaws, the Makita 9564CV is a great value for the money.

Here are some additional thoughts on the Makita 9564CV:

  • The dust-sealed switch and bearings are a nice touch, as they help to prolong the life of the grinder.
  • The included accessories are a good value, as they give you everything you need to get started.
  • The Makita 9564CV is backed by a 3-year warranty, which provides peace of mind.

If you're looking for a powerful and affordable angle grinder, the Makita 9564CV is a great option. Just be aware of the noise and vibration levels before you buy.

Makita 9564CV Where To Buy

some places where you can buy the Makita 9564CV and spare parts:

  • Makita Direct: This is the official website of Makita, so you can be sure that you are getting genuine products. They have a wide selection of Makita tools and parts, including the 9564CV. Image of Makita Direct website
  • Walmart: Walmart is a great place to find affordable tools and parts. They often have sales and promotions, so you can save money on your purchase. Image of Walmart website
  • Amazon: Amazon is another great place to find tools and parts. They have a wide selection of products from different brands, so you can compare prices and find the best deal. Image of Amazon website
  • Best Buy: Best Buy is a good option if you are looking for a brick-and-mortar store where you can buy the Makita 9564CV. They have a limited selection of parts, but they can usually order them for you. Image of Best Buy website
  • Lowes: Lowes is another good option for brick-and-mortar stores. They have a wider selection of parts than Best Buy, but they may not have the exact part you need in stock. Image of Lowes website
  • eBay: eBay is a good option if you are looking for a used or refurbished Makita 9564CV. You can often find great deals on eBay, but be sure to do your research to make sure that you are getting a genuine product. Image of eBay website

I hope this helps!

Makita 9564CV Problems and Solutions

some common issues and solutions for the Makita 9564CV:

Issue: The grinder is not turning on.

Solution:

  1. Make sure the tool is plugged in all the way.
  2. Check the power cord for any damage.
  3. Try a different power outlet.
  4. Reset the tool by pressing and holding the power button for 10 seconds.

Issue: The grinder is not spinning.

Solution:

  1. Make sure the wheel is properly attached.
  2. Check the switch to make sure it is in the "On" position.
  3. Clean the carbon brushes.
  4. Replace the carbon brushes if they are worn out.

Issue: The grinder is overheating.

Solution:

  1. Allow the grinder to cool down before using it again.
  2. Reduce the speed setting.
  3. Use a lower amperage wheel.
  4. Clean the dust vents.

Issue: The grinder is making a strange noise.

Solution:

  1. Check the wheel to make sure it is not damaged.
  2. Check the bearings for wear.
  3. Replace the bearings if they are worn out.

If you are unable to fix the problem yourself, you can contact Makita customer service for assistance.

Here are some additional tips for troubleshooting your Makita 9564CV:

  • Always wear safety glasses when using a grinder.
  • Make sure the work area is clean and free of debris.
  • Do not use the grinder in wet or damp conditions.
  • Inspect the grinder regularly for signs of wear or damage.

By following these tips, you can help to ensure that your Makita 9564CV continues to perform at its best for many years to come.

Makita 9564CV Manual

Safety Information

  • Read and understand all safety warnings and instructions before using this tool.
  • Keep this tool out of the reach of children and unauthorized persons.
  • Use this tool only for its intended purpose.
  • Do not use this tool if it is damaged or malfunctioning.
  • Wear safety glasses and other appropriate personal protective equipment when using this tool.
  • Be aware of your surroundings and keep your work area clean and well-lit.
  • Do not operate this tool in explosive atmospheres.
  • Do not use this tool in wet or damp conditions.
  • Disconnect the power cord before servicing or making adjustments to this tool.
  • Store this tool in a safe and dry place.

Before Use

  • Make sure that the voltage of the power supply matches the voltage rating of the tool.
  • Inspect the tool for any damage before using it.
  • Install the correct type and size of grinding wheel for the application.
  • Tighten the grinding wheel guard securely.
  • Do not overload the tool.

Troubleshooting

  • If the tool is not working properly, check the following:
    • Is the power cord properly connected?
    • Is the switch turned on?
    • Is the grinding wheel properly installed?
    • Is the grinding wheel guard properly tightened?
  • If you are still having problems, contact Makita Customer Service.

Maintenance

  • Keep the tool clean and free of debris.
  • Inspect the tool regularly for signs of wear or damage.
  • Replace worn or damaged parts as necessary.
  • Do not attempt to repair the tool yourself. Contact Makita Customer Service for assistance.

Warranty

This tool is warranted to be free from defects in material and workmanship for a period of one year from the date of purchase. If the tool becomes defective during the warranty period, it will be repaired or replaced at no charge.

Contact Information

Makita USA 14900 North 10th Street Poway, CA 92064

Phone: 1-800-462-5685 Email: [email protected] Website: www.makitatools.com

Additional Information

  • For more information on this tool, please refer to the owner's manual.
  • You can also find additional information on Makita tools and accessories at the Makita website.

I hope this manual has been helpful. Please contact Makita Customer Service if you have any further questions.

Comments

Post a Comment

Popular posts from this blog

Skil 9131 Aa: The Ultimate Guide – Full Specifications, Comparisons, Manuals, Troubleshooting, And Where To Buy

Image
Skil 9131 AA Information the information about the SKIL 9131 AA angle grinder: Introduction The SKIL 9131 AA is an efficient angle grinder that is compatible with 125 mm discs. It has a powerful 720 W motor that provides excellent results for cutting, grinding, and de-rusting. The angle grinder is also equipped with a number of features that make it safe and easy to use, such as a paddle switch, a 'Clic' system for adjusting the guard, and an integrated wrench storage.
Read more

Bosch Evb-ba100: Full Specifications, Comparisons, Manuals, Pros And Cons, Problems, And Where To Buy

Image
Bosch EVB-BA100 Information The Bosch EVB-BA100 is a backup audio interface that allows you to switch in a backup amplifier in the event of a primary amplifier failure. This ensures that your audio system will continue to function even if one of the amplifiers fails. The EVB-BA100 can be used with both 25VRMS and 70VRMS audio signals, and it can be mounted in the same cabinet as the primary amplifier. Image of Bosch EVB-BA100 Specifications
Read more

Unraveling Scheppach Cse2700: From Full Specifications To Potential Issues

Scheppach CSE2700 Information The Scheppach CSE2700 is an electric chainsaw that is designed for light-duty to medium-duty cutting tasks around the home and garden. It has a powerful 2700-watt motor that can handle most cutting jobs, and it comes with a 45.5 cm (18") ProCut guide bar and chain. The CSE2700 also features automatic chain lubrication, a handguard with integrated chain brake, and tool-less chain tensioning. Image of Scheppach CSE2700 electric chainsaw Here is a table of the full specifications of the Scheppach CSE2700:
Read more